Ini firmwarenya:
Cubot X19 Stock Rom firmware Flash File that will allow you to restore your Cubot X19 Smartphone to its original state. You will find these stock Rom files useful if you have used the flashed custom Rom /builds on your device, tweak your device to the taste you don’t want, bricked and wish to return it to factory state.
Then this Cubot X19 Stock Firmware will fix your bricked phone; We will guide on how to flash the right official Cubot X19 Stock Firmware on your device without errors. This flashing guide is easy and straightforward to follow. We have listed the Cubot X19 Flash File below. Download the right stock ROM file to fix your device.
Advertisement
How To Flash Cubot X19 Stock Rom Firmware
- Download the Stock Firmware on your personal computer.
- Install the USB MTK Drivers (skip if you have it already installed).
- Download and Launch the Smart Phone Flash Tool (SP Flash Tool)
- Click the Scatter-loading button to navigate to the stock Rom you just downloaded.
- Select the Scatter File from the extracted Stock Firmware on your computer.
- Select the Download Only in the SP flash tool option
- Click the Download button to start the Formating process.
- Connect your device via USB to the computer>> holding volume + and volume – button of your device at the same time or holding power button only so that the flashing process will starting working
- Patiently wait for your device to be formatted.
- After the formatting is done, a Big Green button will pop up on the SP Flash to show that.
- Unplug your device and boot it up.
- If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
- Voila, you are all good.
- Warning
- We will not be held responsible if any damage happens to your device.
0 Komentar untuk "firmware cubot x19"